3-Point PTO Stump Grinder 

Flywheel Diameter	24 in	Mounting	3 Point Hitch Cat. 1 (Quick Attach Compatible)
Flywheel Thickness	3/4 in	PTO Input	540 RPM
Carbid Tip	34 PCS	Max. Torque	1200 N·m
Carbid Tip Material	YG11C	PTO Shaft Weight	44 LBS
Tip Holder Material	42CrMo	Dimensions	29 × 37 × 38 in
PTO HP Required	15–45 HP	Packing	Iron Frame + Carton
PTO Shaft (Included Shipping)	1-3/8” 6 Spline Tractor and Implement Ends PTO Driveline Shaft with Slip Clutch	Weight (N.W/G.W.)	450/563 LBS
Friction Torque Limiter (Slip Clutch)	Included

 

3 Point Hydraulic Wood Chipper 

Required PTO HP	20 - 50HP	Flywheel Housing System	Easy To Open Clamshell
Chipping Diameter	6in	Flywheel Housing Thickness	0.3in
In-feed Chute Opening	25.6 x 25.2 in	Flywheel Shaft	2in
In-feed Opening	6 x 8in	Hydraulic Oil	5.3 gal of ISO 32 or ISO 46 (warmer climates)
In-feed Chute	Quick folding for transport/storage	Hydraulic Pump	Yes - Belt Driven
In-feed System	Self Contained Hydraulic System	Discharge Chute	360 Degree Swivel
In-feed Drive	Forward/Neutral/Reverse with Variable Speed: (0-75 ft/min)	PTO Shaft	Shear Pin Protected PTO Shaft Included
In-feed Roller Size	8in Chisel Tooth	PTO Shaft Length	T4/31.1-38.3 in
In-feed Roller Pressure	Adjustable via Spring Tension	Number of Blades	4 Reversible Blades
Quick Hitch Compatible	Cat 1 Quick Hitch	Finish	Powder Coat Paint
3 Point Hitch	CAT1	Warranty	1 Year
Flywheel Speed	540 RPM	Dimensions (L x W x H)	45x33x45 in
Flywheel Drive System	Direct Drive	Net Weight	695 lbs
Flywheel Diameter	24in	Gross Weight	882 lbs
Flywheel Thickness	0.75in

 

WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s)  for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.